Industry-Grade Autonomous Quadruped Robot
PUDU D5 Series
NVIDIA-powered autonomous quadruped robot (D5 and D5-W) for inspection, security, logistics and rugged outdoor operations.
Price on request
Lease on request
Indicative pricing in AUD. Final price, GST treatment, stock, freight, installation and supplier details are confirmed in the written quotation.
- Australia-wide delivery
- Installation & onsite setup
- Operator training included
- Local support, AEST hours
Product video
See the PUDU D5 Series in action
Official PUDU Robotics product video. For an Australian deployment walkthrough, book a site assessment.
About the PUDU D5 Series
The PUDU D5 Series (D5 and rugged D5-W) is an industry-grade autonomous quadruped robot, powered by an NVIDIA Jetson Orin AGX 64GB + RK3588 dual-processor platform delivering up to 275 TOPS of on-board compute. Dual 96-line spherical LiDAR (192-line optional) plus four fisheye cameras deliver 360° centimetre-level perception, while a 165 Nm peak joint torque and 1000 Wh battery enable 2–3 hours of autonomous operation in real-world conditions.
Built for site inspection, security patrol, outdoor logistics and research-grade deployments across Australia, the D5 Series handles 25–30 cm steps, climbs up to 80 cm, ascends 25–30° slopes and descends 45° slopes at cruise speeds up to 5 m/s. IP67 ingress protection and an operating range of -20°C to 55°C (cold-start below -10°C) make it deployable in rain, dust and extreme climate.
Open modular architecture supports add-ons including a metal delivery crate, inspection kit and charging dock — giving operators a single platform for security rounds, infrastructure inspection, outdoor parcel transport and embodied AI research. Workplace Robotics scopes each deployment around your site, payload mix and operating conditions, with full local Australia support.
Key benefits
- NVIDIA Orin + RK3588 dual-processor, up to 275 TOPS
- Dual 96-line spherical LiDAR + 4 fisheye cameras (192-line optional)
- IP67 ingress protection, -20°C to 55°C operation
- Modular: delivery crate, inspection kit, charging dock
Common use cases
- Site inspection
- Security rounds
- Outdoor parcel / sample delivery
- All-terrain operation
Workplace challenges this robot solves
Match PUDU D5 Series to your workplace problem
PUDU D5 Series is recommended by Workplace Robotics for the following operational challenges. Pick the closest match and use our problem finder to compare alternatives.
Why enquire through Workplace Robotics
A practical starting point for a PUDU D5 Series deployment in Australia.
Workplace Robotics helps assess the site and enquiry requirements. The supplying Australian partner confirms the final product configuration, price, stock, freight, installation, training, warranty and support arrangements in writing.
Independent Australian guidance
We match the enquiry to the right PUDU model and commercial approach — purchase, lease or Robot-as-a-Service.
Australia-wide coverage
Enquiries handled for metro and regional sites. Logistics, install and training coordinated by the supplying partner.
Site-assessed quotes
Recommendations reflect your floorplan, throughput and constraints — not a generic online cart total.
Written confirmation
Price, GST, stock, freight, installation, warranty and support terms are confirmed by the supplying partner in writing before commitment.
Shipping, installation & support
From PO to first shift — handled.
Lead times, delivery and commissioning are confirmed in writing after your site assessment so there are no surprises on the loading dock.
- Delivery
- Freight Australia-wide. Typical lead time 2–6 weeks from PO, subject to stock and site readiness.
- Installation & commissioning
- Onsite unboxing, mapping, integration with lifts/doors where supported, and signed handover.
- Operator training
- Hands-on training for cleaners, supervisors and FOH teams. Quick-reference guides supplied.
- Support & SLAs
- Australia-based support during AEST business hours. Optional extended care and remote monitoring.
Specifications
- Variants
- PUDU D5 / PUDU D5-W
- Standing Dimensions
- 900 × 543 × 572 mm (35.4 × 21.4 × 22.5 in)
- Weight (with Battery)
- D5: 61 kg (134.5 lbs); D5-W: 62 kg (136.7 lbs)
- Computing Platform
- NVIDIA Jetson Orin AGX 64GB + RK3588
- Perception Sensors
- Dual 3D LiDAR + Four Fisheye Cameras
- Maximum Joint Torque
- 165 Nm (121.7 lb·ft)
- Battery Capacity
- 1000 Wh
- Operating Time
- D5: 2–2.5 h; D5-W: 2–3 h
- Continuous Walking Payload
- 20–30 kg (44–66 lbs)
- Climbing Capability
- Up to 80 cm (31.5 in)
- Maximum Step Height
- D5: 30 cm (11.8 in); D5-W: 25 cm (9.84 in)
- Slope Capability
- D5: 25° ascent, 45° descent; D5-W: 30° ascent, 45° descent
- Operating Temperature
- -20°C to 55°C (-4°F to 131°F)
- Cold-Start Capability
- Below -10°C (14°F)
- Ingress Protection
- IP67
- Autonomous Navigation
- Supported
- Autonomous Following
- Supported
- Voice Interaction
- Supported
Full technical specifications provided during site assessment.
Ready to see if robots make sense for your workplace?
Book a site assessment and Workplace Robotics will help you identify the right robot, commercial model and deployment pathway.